I need to take down a drywall, any ideas? - drywall ideas
Plasterboard 9 meters in height and width of just over 4 feet, and I want to take on .... Ideas.
by the way this project is my first building. If you could let me know of a site estimated to steer me step by step.
Thank you,
Thursday, February 4, 2010
Drywall Ideas I Need To Take Down A Drywall, Any Ideas?
Subscribe to:
Post Comments (Atom)
7 comments:
New gypsum board is square and straight. If you take your time, you can get exactly what you need and are easy to replace. First try to find the next pin to 4 meters. Use a level and a vertical line to the mark of 4 feet. If you get in the middle of the 2 x 4 wall, installing a new piece is not so difficult. To cut the part you can use a circular saw, all saw, jigsaw, handsaw, so that you get what I should think. In order to achieve the ends of the mountain, not with a knife, a knife, sheet rock or stone blade. For more information, visit the DIY Network and update back to previous episodes of the Old House leaders.
Well, there are things to consider:
1. Is there a support beam or power lines on the wall. If one of them can not be cut can not be ignored or postponed the wall
2. Is your space ready for the dust and dirt. You can cover the doors of the room near the ground and with a plastic foil (the thicker variety)
3. Who is to help. Contacts with the idea of beer is good
4. Do you really need from a wall?
For tools you will need a hammer, a crowbar have looked handhelds and brushes for cleaning. The rest is pretty obvious, Smash the wall with a hammer to break remove the pieces with a lever, the wall studs with a saw, then clean up that you have) (and your friends with beer. It's easy and fun, my first departure of drywall when I was 13 and I really enjoyed the boy, I was crazy. However, it can help the holes in the roof, repairs, where appropriate, elimination, I check other sources for it.
Drywall breaks easily, use a claw of a claw hammer and struck her. Very simple. Then go back and remove nails or screws with the tool.
Drywall breaks easily, use a claw of a claw hammer and struck her. Very simple. Then go back and remove nails or screws with the tool.
Not demolish Dismantling
Remove the patch, then the NTFS partition.
Cases of beer and a few friends. Bring your own hammer ears.
Hammer
Post a Comment